OP Error Code
📋 What Does OP Mean?
Open/Power Error — the refrigerator door has been open too long or power was interrupted.
🔍 Common Causes
- 1Door left open
- 2Power outage
- 3Door seal allowing warm air ingress
📞 When to Call a Pro
If error persists with door closed, door seal or sensor may need replacement.
🔧 DIY Fix Steps
- 1Ensure door is fully closed and seal is intact
- 2Press the Reset button on the control panel
- 3Check door gasket for damage or gaps
- 4After power outage: allow 24 hours to stabilize temperature
Frequently Asked Questions
What does OP mean on a Ge refrigerator?
Open/Power Error — the refrigerator door has been open too long or power was interrupted.
Can I fix OP myself?
Yes, in many cases. Start with: ensure door is fully closed and seal is intact If that does not resolve it, if error persists with door closed, door seal or sensor may need replacement.
How much does it cost to repair error OP?
Estimated repair cost: $50–$150 for door gasket. This varies by region and technician.
Tools That Help With This Diagnosis
Basic troubleshooting tools grouped separately from the actual error-code explanation.
Multimeters
Useful for basic electrical checks when the repair path calls for it and the unit is safely isolated.
Driver sets
Useful when the first obstacle is simply reaching the part or hose involved.
Cleanup tools
Useful for drain and leak faults where standing water hides the problem.
Related Pages
More Ge error codes
Browse related codes for the same brand and appliance family.
E3 code page
Open another nearby code that often appears in the same troubleshooting path.
Troubleshooting guide hub
Open broader diagnosis, symptom, and first-step guides.
Diagnostic tools
See basic tools that help without mixing them into the code explanation itself.
Related Troubleshooting Guides
Water Supply Error Guide
How to troubleshoot fill-time, no-water, and inlet-valve related appliance errors.
Refrigerator and Thermostat Error Guide
Troubleshooting guidance for cooling, open-door, sensor, and HVAC control related error messages.
OP first steps guide
The first checks to make when you see error code OP.