E119 Error Code
📋 What Does E119 Mean?
Oven Temperature Sensor Shorted — the probe is reading a short circuit.
🔍 Common Causes
- 1Probe wires shorted together inside oven cavity
- 2Probe housing cracked and shorted
- 3Wiring harness pinched
📞 When to Call a Pro
Certified Thermador technician required for probe and wiring replacement.
🔧 DIY Fix Steps
- 1Press Cancel immediately and turn off circuit breaker
- 2Do not use oven until repaired — temperature runaway risk
- 3Allow full cool-down before any inspection
Frequently Asked Questions
What does E119 mean on a Thermador oven?
Oven Temperature Sensor Shorted — the probe is reading a short circuit.
Can I fix E119 myself?
Yes, in many cases. Start with: press cancel immediately and turn off circuit breaker If that does not resolve it, certified thermador technician required for probe and wiring replacement.
How much does it cost to repair error E119?
Estimated repair cost: $150–$500. This varies by region and technician.
Tools That Help With This Diagnosis
Basic troubleshooting tools grouped separately from the actual error-code explanation.
Multimeters
Useful for basic electrical checks when the repair path calls for it and the unit is safely isolated.
Driver sets
Useful when the first obstacle is simply reaching the part or hose involved.
Cleanup tools
Useful for drain and leak faults where standing water hides the problem.
Related Pages
More Thermador error codes
Browse related codes for the same brand and appliance family.
E118 code page
Open another nearby code that often appears in the same troubleshooting path.
Troubleshooting guide hub
Open broader diagnosis, symptom, and first-step guides.
Diagnostic tools
See basic tools that help without mixing them into the code explanation itself.
Related Troubleshooting Guides
F2 E0 first steps guide
The first checks to make when you see error code F2 E0.
F2 E0 meaning and causes guide
A clearer explanation of what F2 E0 usually means and what tends to cause it.
F2 E0 DIY checklist
A practical DIY checklist for diagnosing error code F2 E0 before calling for repair.